Matt Bradbury, Author at Wellbeing Group - Page 7 of 35



View Cart
01905 917328

ABOUT US

FACILITIES MANAGEMENT

CASE STUDIES

FAQ

BLOG

CONTACT

sales@thewellbeinggroup.co.uk

01905 337187

Billi Tap Reset Procedure

Billi Tap Reset Procedure

Boiling Water Taps

Water Dispensers

Coffee Machines

Vending Machines

Coffee & Consumables

Service & Maintenance

Billi Tap Reset

Procedure

Official partner for Billi Tap systems, fully trained and approved contractor for the supply, installation and service of all Billi Tap products, including Billi Tap filters & spare parts.

If your Billi Tap System says ‘locked off’ as it has not been operational after a couple of weeks after your office Christmas break or after relocation for example, you may need to complete a Billi reset procedure to get your Billi Tap back up and running.

This Reset procedure is for Billi Taps with units fitted with Display/Control Panel on Under-sink unit only. If you need further assitance, please don’t hesitate to get in touch with our service team. We are an official service provider for Billi Tap systems. This means we’re a fully trained and approved contractor for the supply, installation and service of all Billi Tap products. 

Billi Tap

Symptom – Found nonresponsive and with no lights displaying on Dispenser assembly. No boiling water dispensed and cold water dispensing but not chilled.

Initially – Turn system off at mains power socket for 30 seconds to reset. Wait 15 minutes (red & blue lights will be flashing on the tap) and recheck. If symptoms persist, please follow steps below.

 

Step 1 – Inspect system under the sink and see what information is being displayed on the screen. If unable to read or blank, – push the “back” control button as this will take the system out of display screen saver mode and the display with activate and will display information.

Step 2 – If the system is displaying “locked off”, find your “mode” control button on the far Righthand side located next to the display screen (button usually blue). Push, hold and cycle button down until you see the “locked on” mode being displayed on the screen. You may need to function a few times to get correct selection.

Step 3 – Once in “locked on” the system will need to reheat and chill down, and this may take up to 25min depending on the size of your system. At this time the red and blue light on the tap will be flashing.

Step 4 – Once the red and blue lights on the tap have become solid (permanently on) this will indicate the system is ready for use. Push the red lever down (Active Safety on rear of dispenser if previously engaged) and confirm boiling water will dispense (do not place hands under boiling water outlet) and then test the chilled side by pushing the cold lever down.

Step 5 – Return to Time Switch Settings-If preferred. Use the “mode” control button on the far-Right hand side located next to the display screen (button usually blue). Push and hold button down until you see the “Time Switch ON” mode being displayed on the screen. Press the “back” control button to return to main display.

 

If your system is inoperative or has an ongoing fault, please contact our Service Team to lodge a service request as all other inspections or diagnosis will be required to be completed on site.

Billi Filters
Billi Under-Counter Unit

We can service and repair any Billi tap system whether you are an existing Wellbeing Group customer or not. You could have bought your Billi Tap from anyone but we will still happily resolve your issue for you, our service standards are industry leading and we promise a rapid response to your issues.

Six Benefits of a Billi Tap Maintenance Plan:

  • Proactive preventative maintenance helps to avoid break downs

  • Dedicated scale management plan based on your local conditions to maximise energy & unit efficiency

  • Filters are changed on time which ensures a consistent taste and reduces the risk of lime scale build up

  • Easier to budget for, as all costs can be worked out at the start of the year

  • Priority service as your unit can be logged onto our service system ahead of time

  • Save money on standard Pay as You Go service rates and ad hoc visits.

  • One phone number and a dedicated service email which you can log any service requests

Service & Maintenance Plans

Silver – includes routine servicing and replacement filters (both scale and taste filters)

Gold – includes routine servicing, replacement Billi filters and covers all labour charges on any break downs

Platinum – full package which includes servicing, filters, labour charges and replacement parts

Basic

SILVER

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Advanced

GOLD

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Premium

PLATINUM

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

 

Visit our Billi Tap Service Page for more details and get in touch with our friendly knowledgeable team who can advise on the best options and pricing based on the solutions you need. 01905 337187

Boiling Taps vs Kettles

Zip HydroTap G4 Servicing

Zip HydroTap G4 Servicing

Boiling Water Taps

Water Dispensers

Coffee Machines

Vending Machines

Coffee & Consumables

Service & Maintenance

Zip HydroTap G4 Servicing

Wellbeing Group are a Platinum Partner for Zip Tap systems. This means we’re a fully trained and approved contractor for the supply, installation and service of all Zip Tap products, including the Zip HydroTap G4.

This also means we can service and repair any Zip tap system whether you are an existing Wellbeing Group customer or not. You could have bought your Zip Tap from anyone but we will still happily resolve your issue for you, our service standards are industry leading and we promise a rapid response to your issues.

Zip HydroTap G4 Repairs & Filter Replacements

Our team of skilled technicians specializes in the servicing and repair of Zip HydroTap G4 systems, ensuring they function flawlessly year-round. Here’s what sets our service apart:

Expert Technicians: Our technicians are factory-trained and equipped with in-depth knowledge of the Zip HydroTap G4. They are capable of identifying and resolving any issues promptly and efficiently.

Comprehensive Servicing: We offer comprehensive servicing that covers all essential aspects of the Zip HydroTap G4, including filter replacement, temperature calibration, and general system checks.

Timely Repairs: In the event of a malfunction, we understand the urgency of the situation. Our rapid-response team ensures that repairs are carried out swiftly, minimizing downtime and disruptions.

Filter Replacement: The water filter in the Zip HydroTap G4 plays a vital role in maintaining water quality. Replace the filter regularly to ensure that employees continue to enjoy clean and great-tasting water.

Genuine Spare Parts: We use only genuine spare parts to maintain the quality and performance of the Zip HydroTap G4, giving you peace of mind and confidence in our services.

Scheduled Maintenance Plans: To simplify the process, we offer customized maintenance plans tailored to your company’s needs. These plans help ensure regular check-ups, reducing the likelihood of unexpected breakdowns.

Zip HydroTap G3
Zip Taps UK

Approved Zip Tap UK Service Provider

As a Platinum Partner for Zip Taps UK, we are a fully trained and approved contractor for the supply, installation and service of all Zip Tap systems. From the taps and undercounter systems themselves, to filter parts and accessories. Our unrivalled support and aftercare sets us apart in the UK as service provider for Zip UK, fully trained Zip Tap engineers nationwide for rapid response and installations.

Service & Maintenance Plans

Silver – includes routine servicing and replacement filters (both scale and taste filters)

Gold – includes routine servicing, replacement Zip filters and covers all labour charges on any break downs

Platinum – full package which includes servicing, filters, labour charges and replacement parts

Basic

SILVER

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Advanced

GOLD

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Premium

PLATINUM

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

 

By partnering with the Wellbeing Group, your organization can rest assured that your Zip HydroTap G4 will be well-maintained, providing a continuous supply of pure, chilled, and boiling water.

You can browse our range of Zip Taps to select your favourite. Get in touch with our friendly knowledgeable sales team who can advise on the best options based on your specifications. 01905 337187

Are Boiling Water Taps Eco-Friendly?

Zip HydroTap G4 Servicing

How to use levers and buttons on Zip HydroTap G4

Boiling Water Taps

Water Dispensers

Coffee Machines

Vending Machines

Coffee & Consumables

Service & Maintenance

How to use levers and buttons on Zip HydroTap G4

A unique safety lock eliminates the risk of accidental discharge of boiling water.
Press both the red lever and the “safety” button at the same time for access to boiling water. 

To deactivate the safety button, hold the chilled lever and safety button for 10 seconds until the safety button turns off, it is now disabled and you can have boiling water access by simply depressing the red lever.

Repeat the process to reactivate the safety button as required.

Boiling Water Dispense

A unique safety lock eliminates the risk of accidental discharge of boiling water.
Press both the red lever and the “safety” button at the same time for access to boiling water. 

To deactivate the safety button, hold the chilled lever and safety button for 10 seconds until the safety button turns off, it is now disabled and you can have boiling water access by simply depressing the red lever.

Repeat the process to reactivate the safety button as required.

Zip Tap Boiling

Hands Free 

Flick the red lever towards you and boiling water will run for any pre set period of 5-15 seconds.

Zip Tap Boiling

Chilled Water Dispense

Zip Tap Levers

Press the blue lever to dispense either chilled or Ambient filtered water, depending on which model of HydroTap you are using. 

Hands Free 

Flick the blue lever towards you and a set limit of 700ml of chilled or ambient water will run which is especially useful for filling water bottles or carafes.

Zip Tap Boiling

Zip Tap Sales & Enquries

Our expert team will be able to advise on the most suitable Zip Tap system and service plans for your business. Full and dedicated account management from enquiry to install and expert aftercare.

01905 337187

Zip Tap Technical Support

Our very experienced technical support team are able to fix machines over the phone, by providing a helpful walkthrough assistance. If this cannot be resolved then an engineer call out will be arranged.

01905 337187

Zip Tap

Troubleshooting & FAQ’s.

Do I need to be a Wellbeing Group customer to have my “Zip Tap” serviced?

No, you do not need to be an existing customer to receive our water tap service and support. We provide Zip Tap support for any office that has a tap and needs servicing; however our service plans make it cheaper and less hassle to keep your machine in prime dispensing order.

Click Here To View Our Plans

My Zip Tap is not dispensing water, what shall I do?

Firstly, enquire whether the water supply to your building has been interrupted at all, often it could be down to localised water pressure. Next, try checking that the water supply to the Zip under counter unit is turned on. Sometimes this could be isolated by a member of staff by mistake and would prevent the cold water supply reaching the tap. Also, check that the power is turned on, and see if there are any error messages shown on the display screen. If you do have an error message showing on your Zip tap, it may be best to speak to one of our service team.

01905 337187

My Zip Tap is leaking or dripping?

If you are experience water leaking from the tap head or under counter unit, immediately switch the machine off at the mains and isolate the water supply to the machine. Contact our service team who will advise and arrange an engineer to visit your office to resolve. 

01905 337187

How often do water do Zip Tap Filters need changing?

Your Zip Tap will require a new filter every 12 months, (or after 30,000 litres) the change filter light will flash white indicating that a filter change is due and one of our engineers will come out to replace this for you. You can either purchase these diretly from us to replace yourself, alternatively you can save money and hassle with our service plans and one of our engineers will come out to replace this for you. If you don’t have a service plan with us, please get in touch to find out more.

01905 337187

Where can I buy Zip C02 cannister replacements for sparkling water taps?

You can buy Zip C02 gas replacements directly from us here at Wellbeing Group. Click here to purchase the correct replacement for your sparkling Zip Tap

Service & Technical

Support Form

Our service team will normally aim to respond within 2 hours of queries submitted.

[contact-form-7 id=”2568″ title=”Service & Support Form”]

Zip HydroTap Service Plans

Silver – includes routine servicing and replacement filters (both scale and taste filters)

Gold – includes routine servicing, replacement filters and covers all labour charges on any break downs

Platinum – full package which includes servicing, filters, labour charges and replacement parts

Basic

SILVER

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Advanced

GOLD

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Premium

PLATINUM

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

 

Book a maintenance visit:

Our Zip service technicians are qualified water system experts, trained to professionally service and maintain all Zip products and other brands throughout the UK.

Booking a Zip Tap service call is easy – simply email sales@thewellbeinggroup.co.uk with the details below, and we will do the rest for you:

  • Product Type:
  • Model (if known):
  • Serial Number:
  • Details of the fault:
  • Company Name:
  • Location of the equipment:
  • Contact Name:
  • Contact Number:

If you would prefer to discuss your service request over the phone, please call our friendly team on 01905 337187 where will be more than happy to give you our best advice and quotation.

 

Benefits of filtered water

Borg and Overstrom B2 B4 B5 B6 Discontinued

Borg and Overstrom B2 B4 B5 B6 Discontinued

Boiling Water Taps

Water Dispensers

Coffee Machines

Vending Machines

Coffee & Consumables

Service & Maintenance

Borg & Overstrom B2 / B4 / B5 / B6 Models Discontinued

Borg & Overstrom, a name synonymous with high-quality water dispensers, has announced the discontinuation of its B2, B4, B5 & B6 models. It is a decision which is down to the company’s commitment to innovation and delivering forward-thinking and more sustainable products.

However, the good news is that the Wellbeing Group will ensure continued support for these models, offering servicing, repairs, and a supply of essential filters, CO2 and parts. 

As an official Borg & Overstrom partner and service provider, existing users can still access parts, filters, and expert service and repairs for their Borg & Overstrom B2 B4 B5 B6 systems. In addition to this, we have three maintenance packages; Silver, Gold and Platinum. Each of these Borg & Overstrom service plans have different levels of cover depending on what your requirements are.

Supporting The Transition

For those who rely on the Borg & Overstrom B2 B3 B5 B6 models and are concerned about maintenance, repairs, and access to replacement parts and filters, Wellbeing Group is here to provide peace of mind. As a leading provider of Borg & Overstrom products and services, we are committed to supporting existing users even after the discontinuation of the models.

1. Access to Genuine Parts: We stock of genuine Borg & Overstrom parts, ensuring that users can continue to replace components when necessary. This means that if any part of your office water dispenser system requires replacement, you can trust that it will be with authentic components, maintaining the high-quality performance of your appliance.

2. Filters and Maintenance: Regular maintenance and filter replacements are crucial to ensuring the continued efficiency and safety of your Borg & Overstrom water dispenser. Wellbeing Group offers a range of filters and maintenance services to keep your system running smoothly. This ensures that you can enjoy the same great-tasting, filtered water.

3. Expert Service and Repairs: If your water dispenser requires repair or servicing, our team of highly trained technicians are ready to assist you. With their extensive knowledge of Borg & Overstrom systems, they can diagnose and address any issues promptly. Or if required arrange an engineer to visit your site, whilst ensuring minimal disruption to your business.

Borg & Overstrom

The Importance of Professional Service and Repair

When it comes to maintaining the functionality of your Billi Eco Tap, professional service and repair are crucial. Attempting to fix complex appliances without the necessary expertise can lead to further damage and safety hazards. Here are some reasons why professional assistance is essential:

 

  1. Expertise: The Wellbeing Group’s technicians are trained and certified to work on Billi appliances, ensuring that your system receives the best care possible. They have in-depth knowledge of the product and can identify and rectify issues swiftly.
  2. Safety: Handling electrical and plumbing components requires a thorough understanding of safety procedures. The Wellbeing Group’s professionals are equipped with the necessary skills and tools to work on your Eco Tap safely, minimizing the risk of accidents.
  3. Efficiency: Professional service and repair ensure that your Billi Eco Tap operates at peak efficiency. This not only saves you money on energy bills but also extends the lifespan of your appliance, reducing the need for frequent replacements.
Borg & Overstrom
Borg & Overstrom

Services Offered Wellbeing Group

We are committed to providing comprehensive support for Borg & Overstrom B2, B4, and B5 users. Here’s what they’ll be offering:

Servicing: Regular maintenance is essential to keep water dispensers in optimal working condition. Wellbeing Group will offer servicing for these models, ensuring they continue to function reliably.

Repairs: In the event of a malfunction or breakdown, our team of experienced technicians will be on hand to provide timely and efficient repairs, minimizing downtime.

Supply of Filters and Parts: Filters and replacement parts are crucial for the continued functionality of water dispensers. We will maintain a stock of filters and parts specifically designed for the B2 B4 B5 B6 models, making it easy for businesses to access these essential components.

The New Borg & Overstrom E-Series Range

Replacing the B-Series, will be the Borg & Overstrom E4 and E6 water dispensers. Wellbeing Group will be stocking this range on our website as Nebraska Sport III and Nebraska Pro Water Dispensers. The Borg & Overstrom E4 and E6 will be even more technologically advanced, more sustainable and still looking great in your workplace.

Water Dispensers
Borg & Overstrom

Borg & Overstrom Service Plans

Silver – includes routine servicing and replacement filters (both scale and taste filters)

Gold – includes routine servicing, replacement filters and covers all labour charges on any break downs

Platinum – full package which includes servicing, filters, labour charges and replacement parts

Basic

SILVER

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Advanced

GOLD

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

Premium

PLATINUM

 

High-quality, rapid personal service
with a smile …and Free Biscuits!

 

Six Monthly Preventative Maintenance
Visits (to include full Service and
Sanitisation to Industry Standards)

Comprehensive Scale Management
Plan (Includes Six Monthly Scale
Removal filter replacement)

Priority Emergency Breakdown Cover –
Including all site visits and labour as
required (96% of breakdowns are
resolved by end of the next working day)

 

Replacement Parts Cover (Including
associated labour costs)

 

Book a maintenance visit:

Our Billi service technicians are qualified water system experts, trained to professionally service and maintain all Billi products and other brands throughout the UK.

Booking a Billi Eco Tap service call is easy – simply email sales@thewellbeinggroup.co.uk with the details below, and we will do the rest for you:

  • Product Type:
  • Model (if known):
  • Serial Number:
  • Details of the fault:
  • Company Name:
  • Location of the equipment:
  • Contact Name:
  • Contact Number:

If you would prefer to discuss your service request over the phone, please call our friendly team on 01905 337187 where will be more than happy to give you our best advice and quotation.

 

Benefits of filtered water

How To Make Iced Coffee At Work

How To Make Iced Coffee At Work

Boiling Water Taps

Water Dispensers

Coffee Machines

Vending Machines

Coffee & Consumables

Service & Maintenance

How to Make Iced Coffee At Work

There’s nothing quite like a refreshing iced coffee to kickstart your day or to peak you up mid-morning. Cold Brew, Iced Coffee and Nitro Coffees are a trend that looks set to stick around and are now forefront on the menus of high street and independant coffee shops. Cold coffee beverages now make up a large percentage of sales on the high street and people are looking for ways to get their cold brew fix at home.

Fortunately, with the convenience of a bean-to-cup coffee machine available right in your office, crafting the perfect iced coffee is easier than you might think. In this article, we’ll guide you through the simple steps to create a delightful, iced coffee recipe that will keep you cool and energized throughout your workday.

Our speciality selected coffee blends are great to use in your cold brew or iced latte, our Fairtrade, 100% Arabica coffee beans can be purchased directly from us here.

Iced Coffee Recipe – Ingredients & Equipment:

  1. Office bean-to-cup coffee machine
  2. Fresh coffee beans (choose your favorite roast)
  3. Filtered water
  4. Ice cubes
  5. Milk or milk alternative (e.g., almond milk, soy milk)
  6. Sweetener (sugar, honey, or flavored syrups) – optional
  7. Tall glass or a plastic cup
  8. A long spoon or stirrer
  9. Optional whipped cream and garnishes
Iced coffee

Step-by-Step Guide Iced Coffee Recipe:

 

1. Prepare Your Coffee Machine: Start by ensuring your office bean-to-cup coffee    machine is clean and in good working order. Clean, crisp filtered water will make your iced coffee so much more refreshing.

2. Choose Your Coffee Beans: Select your favorite coffee beans or a blend that suits your taste preferences. The choice of beans can significantly influence the flavor of your iced coffee. For a classic iced coffee, medium to dark roast beans often work best.

3. Grind the Coffee: Most bean-to-cup machines have a built-in grinder. Set the machine to the desired coffee grind size, typically a coarser setting for iced coffee. Grind enough coffee beans to brew a single cup.

4. Brew Your Coffee: Place a cup or glass under the coffee spout and start the brewing process. Let the machine work its magic, extracting a fresh cup of coffee directly into your chosen vessel.

5. Sweeten and Chill: If you prefer your iced coffee sweetened, add sugar or flavored syrup to taste while the coffee is still hot. Stir well to ensure the sweetener dissolves completely. Allow the coffee to cool to room temperature.

6. Ice It Up: Fill your glass or cup with ice cubes, leaving some room at the top for the milk (if required). The ice will quickly chill the coffee and dilute it to the perfect strength.

7. Add Milk or Milk Alternative: Pour in your desired amount of milk or milk alternative. Adjust the quantity to suit your taste. Give it a gentle stir to combine the coffee, sweetener, and milk.

8. Garnish (Optional): For an extra touch of indulgence, top your iced coffee with whipped cream and a sprinkle of chocolate shavings. This step is entirely optional but adds a delightful aesthetic and flavour element.

9. Enjoy: Grab a long straw or sip directly from the glass, and enjoy your freshly made iced coffee. Savor the rich coffee flavor, the refreshing ice, and the creamy milk.

Iced Latte
Iced Coffee

Making an iced coffee with your office bean-to-cup coffee machine is a straightforward and delightful process. With just a few simple steps, you can create a cool, caffeinated treat that’s perfect for staying refreshed and alert during your workday.

Customize your iced coffee to suit your taste, experimenting with different coffee beans, milk options, and sweeteners until you find your ideal combination. Cheers to staying cool and caffeinated in the office!

Your One-Stop-Shop for Coffee & Consumanbles

From Coffee, Tea and Chocolate to Cups, Biscuits and Syrups. At Wellbeing Group we not only sell Coffee Machine for you workplace  but all the supplies you need you keep your office well-stocked.

Head on over to our full range of supplies and esentials here.

Re-Stock. Replenish. Revitalise.