Billi Tap systems can dispense filtered boiling, chilled and sparkling water all from one tap, alongside hot and cold water mixer taps for a complete water dispense solution.
We have systems that can deliver one water type (such as filtered boiling or filtered chilled) through to all five water types from a single tap and under-counter unit.
Wellbeing Group are a Platinum Partner for Billi Tap systems. This means we’re a fully trained and approved contractor for the supply, installation and service of all Billi Tap products.
How it works
In the early 90’s, the Billi Research and Development Team took waste heat recovery to a new level. Using heat-exchange technology and applying it to a conventional technology water boiler, the Billi team came up with a new and significant, far reaching idea. In consequence, the product they designed became the world’s first under-counter boiling and chilled drinking water system. This instantly provided perfect temperature drinking water, cup after cup after cup.
Furthermore, they harnessed thermodynamic heat-exchange technology to recover waste heat energy. By harvesting the waste heat generated by the chilled water cooling cycle, they reused it to pre heat the water entering the hot water tank. This design provided a massive CO2 energy saving compared to conventional boiling and chilled units. Billi still leads the market for commercial boiling taps today by using this technology.
Why Billi Taps Don’t Need Ventilation In The Cup
One challenge which most boiling and chilled taps still face, are under-counter temperatures. The excessive heat build-up under-counter requires ventilation, substantial airspace and in most cases, unsightly ventilation grilles in the cupboard doors themselves.
How Billi Taps Have Overcome This
Using the same waste heat recovery technology, all Billi Quadra systems are cooled by water and DO NOT require under-counter ventilation.
No grilles, no ducts, no excessively hot cupboards, and especially relevant, no damage to joinery or additional draw on the office air conditioning.
Energy Efficiency
Just imagine how fast you could boil your water if it was already hot. It’s a bit like filling a kettle from your hot tap, then boiling that. But in the case of Billi Taps, our technology does just that, except (unlike a kettle), we provide water that is filtered to give a pure odourless, sediment-free taste. This enables Billi to produce a system that uses far less electricity and apart from the very largest commercial unit, the Quadra will run from a 13 amp power supply.
Then with our Time Clock, Sleep Mode and Eco Mode, you can rest knowing that you are saving every day on your energy bills, but still have instant dispense through the days from your Billi Taps.
Useful Billi Tap guides
For our design and fit out and facilities management customers, we have also provided a clear breakdown of each taps energy performance capabilities, dimensions and the requirements for installation, power and water supply. And of course a breakdown of purchase and lease pricing, for which we offer flexible payments plans. If there is still anything you happen to be unsure about you can still speak to our experts in a our service team to help you figure out the best Billi Tap for your workplace.
Billi Tap water dispense options & combinations
We stock every single dispense option available in the Billi Tap range, so depending on your budget and workplace requirements, here at Wellbeing Group we have Billi system that will be a perfect addition to any office. Don’t forgot our stunning range of colours and finishes also.
– Boiling and Chilled
– Boiling and Sparkling
– Chilled and Sparkling
– Boiling and Chilled with Hot & Cold
